3rdgen
In Staging Lanes
Posts: 66
|
Post by 3rdgen on Sept 28, 2012 13:55:57 GMT -9
Looking for suggestions on someone/business to cut and bend some Aluminum sheeting for a dash. Looking for someone that can do "house calls".
Thanks for any ideas.
Will
|
|
3rdgen
In Staging Lanes
Posts: 66
|
Post by 3rdgen on Sept 28, 2012 14:05:54 GMT -9
"house calls" as in come out, see what it needs, make the measurements they need then go back to the shop and work their magic, bring it back out and make sure it fits right.
|
|
|
|
Post by AkRacer on Sept 28, 2012 16:54:31 GMT -9
Just a suggestion.
If you can, Make a cardboard template of what you want, then take it to a shop.
They can use it to make what your after.
|
|
3rdgen
In Staging Lanes
Posts: 66
|
Post by 3rdgen on Sept 29, 2012 22:20:21 GMT -9
Thanks, that could do the trick. I know in my head what I want to end up with, just not 100% sure how to get there. Looking to make something "modular" that the face/front panel can be removed easily to get to the wiring in the back/modify things with the rest of the dash still in place and still look good. I’ve seen a couple ways others have done theirs and they are all really nice but nothing has quite struck me "that’s what I’m trying to do"
Thanks again for the suggestion
Will
|
|
|
|
Post by SPRSTK on Oct 1, 2012 15:48:46 GMT -9
Think about a fiberglass dash that is removable.
|
|
