|
|
Post by justheaders on Sept 27, 2013 22:24:31 GMT -9
1980 mustang coupe roller (no engine or transmission) 9" rear end with 4.10 gears/33 spline axles/spool. Full fuel system with fuel cell,set-up for carb, upr tubular k-member w/coil overs,8 pnt cage with harnesses. Setup for small Block ford with a c-4, plumbed for nos as well. As is 3600, will sell a couple different ways, also have a 331 with a c-4. Will include an entire wiring harness to convert to fuel injection as well. Have a bunch of mustang parts, call me at 501-259-8192
Bill
|
|
|
|
Post by justheaders on Sept 27, 2013 22:30:21 GMT -9
If anyone could help me post pics I would really appreciate it!!
Thanks,
Bill
|
|
3rdgen
In Staging Lanes
Posts: 66
|
Post by 3rdgen on Sept 28, 2013 7:59:09 GMT -9
Here's Bills pictures. May take a couple of posts. |
|
3rdgen
In Staging Lanes
Posts: 66
|
Post by 3rdgen on Sept 28, 2013 8:00:30 GMT -9
|
|
3rdgen
In Staging Lanes
Posts: 66
|
Post by 3rdgen on Sept 28, 2013 8:01:26 GMT -9
And last 2: Attachments:
|
|
|
|
Post by justheaders on Sept 28, 2013 8:20:35 GMT -9
Sorry for not posting my location, I'm on JBER located on the Air Force side. Appreciate all the help loading pics!
Thanks,
Bill
|
|
